Citizen CBM-910 Type II Manuel d'instructions Page 90
- Page / 114
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Chapter 7 Application Mode
78 HORIBA
HINT!
For more accurate measurement:
Normally, the amount of the standard solution to be added should be from 0.1% to 10% of
the sample solution. It is desirable that when the standard solution is added to the sample
solution, the concentration of the ion species under measurement increase by 1 to 10
times in the sample solution. If the concentration of the added standard solution is too low
or if the volume of the added standard volume is larger than that of the sample, a large
error may occur in the measurement result.
5. Immerse the ion electrode in sample solution and tap .
The measurement starts. When the indication stabilizes, the HOLD indicator lights up
and the measurement value is determined.
6. Tap to proceed to the next measurement.
7. Immerse the ion electrode in the 1 standard solution and tap .
The measurement starts.
8. Tap to proceed to the next measurement.
9. Immerse the ion electrode in the 2 standard solution and tap .
The measurement starts.
When the measurement is completed, concentration of the sample and the measuring
condition are displayed as measurement results.
Tap to return to the ION standard addition mode screen.
7.1.7 Sample Addition Method (Single) Measurement
This mode is used to obtain the ion concentration of the target ion species by adding a
small amount of the sample to the standard solution for the ion species to measure once,
thus increasing the ion concentration of the target component, and then measuring the
change in electric potential which occurs at that time.
Measurement condition setting
1.
Tap on the right of the Sample addition method item in the ION standard addition
mode screen.
2. Tap on the right of the Sample add. method (Single) item.
- Instruction Manual 1
- ■ Preface 2
- ■ Warranty and Responsibility 2
- ■ Trademarks 2
- Operation Manual 2
- ■ Conformable Directive 3
- ■ FCC Rules 4
- SAFETY OPERATION 5
- ■ Safety Precautions 6
- ■ Description in This Manual 8
- Contents 10
- Chapter 1 OVERVIEW 13
- 1.1.3 Left Side 14
- 1.1.4 Right Side 14
- 1.1.5 Accessories 14
- 1.1.6 Operation Keys 15
- 1.1.7 Icons (Icon Bar) 16
- 1.1.8 Status Icons 17
- 1.1.9 Meas Screen 18
- 10 HORIBA 22
- 12 HORIBA 24
- 1.6 Connecting the Electrode 24
- 1.8 Connecting the Printer 25
- 14 HORIBA 26
- 1.10 Turn ON the Power 27
- 16 HORIBA 28
- 2.1 Meter SET Screen 28
- 2.2 Auto Hold Setting 28
- 2.3 Custom Setting 29
- 18 HORIBA 30
- 2.4 Sample Name Setting 30
- 2.5 Interval Memory Setting 31
- 20 HORIBA 32
- 2.6 USB Memory Setting 32
- 22 HORIBA 34
- 2.7 Printer Setting 34
- (Not be omitted) 35
- 24 HORIBA 36
- 2.8 Screen Settings 36
- 26 HORIBA 38
- 2.9 Sound Setting 38
- 2.10 Language Setting 39
- 2.11 Security Setting 39
- 28 HORIBA 40
- 30 HORIBA 42
- 2.13 Date Setting 43
- 32 HORIBA 44
- 2.14 Analog Output Adjustment 44
- 34 HORIBA 46
- Chapter 3 pH Measurement 47
- 36 HORIBA 48
- 3.1.4 Checking Before Use 49
- 2. Tap 49
- 38 HORIBA 50
- 3.2 pH Calibration 50
- 40 HORIBA 52
- 3.3 Checking Before Use 53
- 42 HORIBA 54
- 3.5 pH Measurement Setting 55
- 44 HORIBA 56
- 46 HORIBA 58
- 3.9 Alarm Setting 58
- 3.10 Electrode Model Setting 59
- 48 HORIBA 60
- 3.12 pH Measurement 61
- Chapter 4 ION Measurement 62
- 4.1.2 Checking Before Use 63
- 52 HORIBA 64
- 4.2 ION Calibration 64
- 54 HORIBA 66
- 4.3 Checking Before Use 66
- 4.4 ION Measurement Setting 67
- 56 HORIBA 68
- 4.7 Alarm Setting 69
- 58 HORIBA 70
- 4.8 Electrode Model Setting 71
- 60 HORIBA 72
- 4.9 Electrode Lot No. Setting 72
- 4.10 ION Measurement 73
- Chapter 5 mV Measurement 74
- 5.3 Alarm Setting 75
- 64 HORIBA 76
- 5.4 Electrode Model Setting 77
- 66 HORIBA 78
- 5.5 Electrode Lot No. Setting 78
- 5.6 mV Measurement 79
- Chapter 6 ORP Measurement 80
- 6.2 ORP Measurement Setting 81
- 6.3 Temperature Setting 81
- 70 HORIBA 82
- 6.4 Alarm Setting 82
- 6.5 Electrode Model Setting 83
- 72 HORIBA 84
- 6.6 Electrode Lot No. Setting 84
- 6.7 ORP Measurement 85
- Chapter 7 Application Mode 86
- 76 HORIBA 88
- 78 HORIBA 90
- 80 HORIBA 92
- 8.1.1 Settings 93
- 82 HORIBA 94
- 84 HORIBA 96
- 8.1.4 Simulator (X-51) Mode 97
- 86 HORIBA 98
- 88 HORIBA 100
- 8.3 Comment Input 100
- Chapter 9 Data 101
- 90 HORIBA 102
- 9.3 Measurement data_latest50 102
- 9.4 Measured data_Search 102
- 9.6 Copy all Meas. Data 103
- 9.5 Cal. results_All 103
- 92 HORIBA 104
- 9.7 Delete all meas. Data 104
- 9.8 Delete all cal. data 104
- Chapter 10 Specifications 105
- 94 HORIBA 106
- 10.2 Default Settings 106
- (Can be set per operator) 107
- 96 HORIBA 108
- 98 HORIBA 110
- 10.3 Options 111
- 1st edition: October 2011 113
- CODE: GZ0000260894 113
- 表紙は別途デザインの表紙とする 114
Produits connexes et manuels pour Imprimer et scanner Citizen CBM-910 Type II
(75 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.092 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels