Citizen PPU-700 Spécifications télécharger pdf (Page 188)

- 186 -

4.5 Black Mark Layout and Operating Condition

Symbol Item BM Paper

I Black mark length

5～10mm

J Black mark width

10mm 以上

L Black mark pitch

100mm～3000mm

● Black marks are selected at two places on the back and one place on the front (PCS value is 0.9 or

more).

* BM position is an option of factory shipment.

● Though printing is available on the printing side having a black mark on the back, print density

may become thin depending on the type of paper; therefore, user



fs notice such as printing on

the place without black mark is necessary.

● Distance between black mark and black mark sensor is approx. 32.5 mm. If black mark is detected

within this distance, next black mark is detected.

● Cut position when black mark is detected by the GS+S command (black mark detection command)

is about 45 mm with the top of black mark used as a reference.

● Amount of automatic paper feed at the detection of black mark can be set by the ESC Y n1 n2

command.

● Basically cut command can be executed in any condition. If minimum distance for issuing a ticket

(80 mm) is not satisfied, paper feed as much as the shorted amount is added by the printer.

* The user is requested to prepare the printing layout in consideration of the above regulations.

12.4mm

Cut position when

black mark is detected.

32.5mm

12.4mm

32.5mm

Cut position when

black mark is detected.

Print Surface

M1 (Back)

(

Front

)

M2 (Back)

er Feed Direction

1 2 ... 183 184 185 186 187 188

Pas de commentaire

Citizen PPU-700 Spécifications Page 188