Citizen PPU-700 Spécifications télécharger pdf (Page 128)

- 126 -

2.2.15 Other Commands

DLE ENQ n

[Function] Real-time request to printer

[Code] <10>H<05>H<n>

[Range] 0≦n≦2

[Outline] The printer responds in real-time to the request that the host specifies with number “n”.

n Function

At the setting of execution of GS ^ by the FEED switch, the same

processing as that pressing the FEED switch once is carried out.

After recovering from an error, the printer resumes printing from the

beginning of the line where the error occurred.

The printer clears the receive buffer and the print buffer, and then

recovers from the error.

[Caution] • (n = 1) or (n = 2) shall be used after removing the error.

• When receiving a code row coinciding with the code configuring this command, the

same operation as this command takes place and attention by the user is required.

Example: When corresponding code row is present in bit image data.

• This command must not be used between other command code rows.

Example: This command is used in the bit image data.

• This command is ignored during transmission of block data.

[See Also] DLE EOT

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 187 188

Pas de commentaire

Citizen PPU-700 Spécifications Page 128