Citizen CLP-631 Spécifications télécharger pdf (Page 18)

Setup

Connection to a Computer

This product has three interfaces that can be used to receive printing data: a

serial port (RS232C), parallel port (IEEE1284, Non-L. P. S.), and a USB port

(USB1.1). An optional internal network interface can be added by your

dealer.

To connect the cable, proceed as follows:

1. Turn OFF both power switches of the printer and the computer.

2. Connect one end of the interface cable to the interface

connector on the back of the printer and secure it with locks or

locking screws, where available.

3. Connect the other end of the interface cable to the interface

connector on the computer and secure it with locks or locking

screws, where available.

Serial Interface Cable

USB Interface Cable

Parallel Interface Cable

Note: If an optional network interface is used, the standard parallel port is

removed from the printer, so the parallel interface cannot be used.

Serial Interface (p.52)

Parallel Interface (p.54)

USB Interface (p.57)

Replacing the Interface

Board (p.58)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 59 60

Pas de commentaire

Citizen CLP-631 Spécifications Page 18