Citizen CLP-631 Spécifications télécharger pdf (Page 12)

Setup

Part Names and Functions

1 Ribbon winding selection switch

This switch allows selection of inside-wound ribbons (also known as "ink

in") and outside wound ribbons ("ink out"). Remember, the inked surface

should be facing AWAY from the printhead surface!

Citizen Hint: To test which surface of the ribbon has ink on it, gently

stick a small piece of adhesive label to the surface of the ribbon.

When you remove the label, you should see ink on the adhesive label - if the

label was touching the inked surface.

2 Ribbon drive unit

3 Head close knob

Push the head close knob to lock the mechanism closed. If you push on

another part of the mechanism, the printer may not lock closed correctly.

4 Ribbon holder

It is used to attach the ribbon and paper core.

5 Front cover

It is removed to install optional units such as the peeler or cutter.

Inside the printer

• To use an inside wound ribbon,

push the switch up.

Setting the Ribbon (p.26)

• To use an outside wound ribbon,

push the switch down.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 59 60

Pas de commentaire

Citizen CLP-631 Spécifications Page 12