Citizen C390 Spécifications télécharger pdf (Page 14)

9. Using the Alarm Mode

The alarm setting procedure and other procedures for alarm use are the same

for Alarm 1, 2 and 3. Only the tone that sounds is different.

The alarm sounds for 15 seconds when the set time is reached once a day.

When the alarm is sounding, it can be turned off by pressing any of buttons (A),

(B) or (C).

1. Turn the crown and set the mode hand to either the Alarm 1, 2 or 3 [AL-1, 2 or

3] mode.

2. Press either button (A) or button (B) to access the city to be corrected.

3. When the crown is pulled out to the second click, the watch enters the alarm

correction state.

4. When button (A) is pressed, the location to be corrected changes each time it

is pressed. Select the location to be corrected so that it flashes.

• The alarm can be set (ON) or canceled (OF) by pressing button (B) when the

watch is in the alarm ON/OF correction state.

• When the crown is turned forward (clockwise) in the "hours" or "minutes"

correction state, correction is made in the positive direction. When the

crown is turned backward (counter-clockwise), correction is made in the

negative direction.

• Turning the crown continuously allows corrections to be made rapidly.

When stopping it, rotate the crown either to the left or to the right.

5. After corrections have been completed, return the crown to the normal

position.

26 27

Alarm ON/OF

Hours

Minutes

<Normal Alarm

Display>

Crown

pulled out

to first click

Crown

returned

to normal

position

Crown

pulled out

to second

click

Crown

pushed in

to first click

Switching

alarm ON

and OF

(A)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 29 30

Commentaires sur ces manuels

Pas de commentaire

Citizen C390 Spécifications Page 14

Commentaires sur ces manuels