Citizen CBM-262 II Manuel d'utilisateur télécharger pdf (Page 81)

Printing Area

(Reference)

Input Data Format

(29) Selecting the character printing direction in page mode

(ESC T n)

Code: [1B] h + [54] h + n

* (0 ≤ n ≤ 3)

(30 ≤ n ≤ 33) Data are expressed in Hex code.

This command selects the character printing direction and starting point in the Page

mode.

Printing Direction

Starting Point

0,30 Left to Right

Top Left

(A in diagram at right)

1,31 Bottom to Top

Bottom Left

(B in diagram at right)

2,32 Right to Left

Bottom Right

(C in diagram at right)

3,33 Top to Bottom

Top Right

(D in diagram at right)

→

→ → → →

← Paper Feed Direction

→ → → →

• If this command is input while Standard mode is selected, the printer's internal flag

operation only is executed. In this case, it has no influence on printing in the

Standard mode.

• The character development position becomes the starting point within the printing

area set by ESC W.

• The basic calculation pitch (x or y) used in the following commands differs ac-

cording to the starting point.

(1) If the starting point is "top left" or "bottom right," (characters are developed in

the direction perpendicular to the paper feed direction)

• Commands which use x: ESC SP, ESC $, ESC \

• Commands which use y: ESC 3, ESC J, GS $, GS \

(2) If the starting point is "top right" or "bottom left," (characters are developed in

the paper feed direction)

• Commands which use x: ESC 3, ESC J, GS $, GS \

• Commands which use y: ESC SP, ESC $, ESC \

• The initial value is “n = 0”.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 130 131

Commentaires sur ces manuels

Pas de commentaire

Citizen CBM-262 II Manuel d'utilisateur Page 81

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimer et scanner Citizen CBM-262 II