Citizen CBM-262 II Manuel d'utilisateur télécharger pdf (Page 71)

m(Hex) Mode

Vertical Direction Horizontal Direction

Number of

Dot Density Dot Density

dots

0 8 dot single density 8 67 DPI 101 DPI

1 8 dot double density 8 67 DPI 203 DPI

20 24 dot single density 24 203 DPI 101 DPI

24 dot double density 24 203 DPI 203 DPI

• If they deviate from the conditions of the values set in m (Bit Image mode), n1 and

subsequent data are processed as ordinary character data.

Input Data Format

(15) Specifying a bit image (ESC * m n1 n2 D1~Dn)

Code: [1B] h + [2A] h + m + n1 + n2 + Dn

* (m = Bit Image Mode (See the following table.)

(0 ≤ n1 ≤ FF)

(0 ≤ n2 ≤ 03) Data are expressed in Hex code.

Data are printed in a bit image in accordance with the Bit Image mode specified by m.

• The number of dots printed in the horizontal direction is divided by 256, with n2

being the product and n1 the remainder.

• The total number of dots printed as the bit image is n1 + (256 x n2).

• If bit image data which exceed the space of one line are input, the portion of data

that runs over the end is dropped.

• Bit image data (Dn) are specified by “1” in printed bits and by "0" in nonprinted

bits.

• The Bit Image mode is as shown in the following table.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 130 131

Pas de commentaire

Citizen CBM-262 II Manuel d'utilisateur Page 71