Citizen iDP-3550 Manuel d'utilisateur Page 31
- Page / 174
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
iDP3550/3551 User’s Manual
15
CITIZEN
Handling of the fan-fold paper
1. iDP3550P can use the fan-fold paper of the 3 to 3.5 inches.
2. Change the position of the sprocket (pin tractor) as necessary when feeding the paper.
3. After feeding the paper, align it with the mark on the platen.
CAUTION : • Be sure to use the specified fan-fold paper.
• Use of unspecified papermay adversely affect print quality, printer service life, and so on.
4. The sprocket holes on 3-inch fan-fold paper may be positioned 6.35 mm or 5 mm from the edge of the
paper. Note the following when feeding 3-inch fan-fold paper.
CAUTION : • 6.35mm
When feeding paper with sprocket holes positioned 6.35 mm from the edge, align the
edges with the paper guides on the printer. Because the edges of the printing area are
close to the sprocket holes, it is important to make sure the paper is positioned correctly.
•5mm
When feeding paper with sprocket holes positioned 5 mm from the edge, align the pins in
the sprockets with the positions of the paper holes and then turn the knob. Note that in this
case there is a gap between the edges of the paper and the paper guides on the printer.
5. Use fan-fold paper with round sprocket holes.
6. When using multiple page fan-fold paper, the perforated line on the margin should be within 5mm of the
side of the paper.
- DOT MATRIX PRINTER 1
- Declaration of Conformity 3
- IMPORTANT SAFETY INSTRUCTIONS 4
- Sicherheitshinweis 6
- For Uses in Canada 6
- Pour L’utilisateurs Canadiens 6
- <CAUTIONS> 7
- PRECAUTIONS FOR INSTALLATION 10
- PRECAUTIONS FOR HANDLING 11
- DAILY MAINTENANCE 12
- CONTENTS 13
- 16
- 1. OUTLINE 17
- 2. BASIC SPECIFICATIONS 18
- 2.2 Basic Specifications 19
- 2.3.2 Printing Position 22
- 2.3.3 Cutter Layout 22
- 3.1 iDP3550 23
- 3.2 iDP3551 24
- 4. OPERATION 26
- Setting the initial 30
- General using 30
- CAUTION : • 6.35mm 31
- 4.10 Removing Paper Jam 34
- 4.13 Print Duty 37
- 5. DIP SWITCH SETTING 38
- 5.2 DIP Switches Setting 39
- 6. PRESET JUMPER SETTING 41
- 7. MODE SETTING METHOD 42
- 8.1 Buffer Size 43
- 8.2 Input Buffer Backup 43
- 8.3 Clearing the Input Buffer 43
- 9. PARALLEL INTERFACE 44
- 9.3 Input and Output Signals 45
- 9.3.3 Timing Chart 47
- 9.3.4 Data Receiving Control 47
- 10. SERIAL INTERFACE 48
- 10.3 Input and Output Signals 50
- 10.3.2 Data Configuration 52
- 11. DRAWER KICK-OUT CONNECTOR 55
- 12. WINDER CONNECTOR 56
- 13. MAINTENANCE AND SERVICE 57
- 14. PRINT CONTROL FUNCTIONS 58
- XXXX ALL 59
- FF n (CBM1 Mode) 60
- FF (CBM2 Mode) 60
- SO (CBM1 Mode) 60
- SO (CBM2 Mode) 61
- SI (CBM1 Mode) 61
- SI (CBM2 Mode) 61
- DC1 (CBM1 Mode) 62
- DC1 (CBM2 Mode) 63
- DC2 (CBM1 Mode) 63
- DC2 (CBM2 Mode) 63
- DC3 (CBM1 Mode) 64
- DC3 (CBM2 Mode) 64
- ESC "∗"n1n2 65
- ESC "−"n 65
- ESC "3" 66
- ESC "O" (CBM1 Mode) 67
- (CBM2 Mode) 68
- ESC "f" 1 69
- ESC BEL n1 n2 70
- ESC "P" 0 (iDP3551) 72
- ESC "P" 1 (iDP3551) 72
- 14.2 Star Mode 79
- 14.2.1 Command List 79
- ESC "E" 82
- ESC "F" 82
- ESC "4" 83
- ESC "5" 83
- ESC "z" 85
- ESC "a" n 85
- ESC "C" n 86
- ESC "C" <0> n 86
- ESC "B" [n]k NUL 87
- ESC "N" n 88
- ESC "O" 88
- ESC "l" n 88
- ESC "Q" n 89
- (G raphic Type) 91
- [Function] Text end 101
- [Code] <03>H 101
- *ETX-STX Mode 102
- ESC "t" n 103
- ESC DC3 n 104
- ESC DC2 n1 n2 105
- (Graphic type) 106
- GS ⁄ m (Graphic Type) 107
- 14.3 ESC/POS Mode 108
- 14.3.1 Command List 108
- ESC " " n 110
- ESC "!" n 111
- ESC "%" n 112
- ESC "@" 115
- ESC "D" [n]k NUL 116
- ESC "R" n 117
- ESC "U" n 118
- iDP3550/3551 User’s Manual 119
- ESC "d" n 120
- ESC i (iDP3551 Only) 120
- ESC m (iDP3551 Only) 120
- ESC "p" m n1 n2 121
- ESC "r" n 122
- ESC "u" n 123
- ESC "v" 124
- ESC "{ " n 125
- (Graphic Type) 128
- 15. CHARACTER CODESTABLE 130
- 15.2 CBM (International) 131
- 15.3 Star (Japanese) 132
- 15.4 Star (International) 133
- 15.10 Codepage PC865 (Nordic) 139
- 15.14 Windows Codepage 143
- 128 CITIZEN 144
- (CENTRONICS 145
- Compliant) 145
- (RS-232C Compliant) 145
- Unit: mm 146
- <VORSICHT> 149
- TÄGLICHE WARTUNG 154
- 4. BETRIEB 155
- 4.6 Einlegen des Papiers 158
- Anfangseinstellung 159
- Allgemeine Verwendung 159
- VORSICHT: • 6.35 mm Abstand 160
- 4.9.1 Restpapierrolle 162
- 4.9.2 Endlos-papier 162
- 1 Sek. vergangen 166
- 4.13 Druckvorgang 167
- 5. DIP-SCHALTER-EINSTELLUNG 168
- Bei Auslieferung ab Werk 169
- Automatische Schneideinheit 169
- Werksseitige Einstellung 170
- 2-C Einstellung 171
- iDP3550/3551 User’s Manual 173
- 1.12E-0605 Printed in Japan 174
Produits connexes et manuels pour Imprimer et scanner Citizen iDP-3550
(50 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.808 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels